Bosch Appliances GVS1000 manual 2Troubleshooting with Diagnostic Mode

Page 23

Global View Station 1000Troubleshooting en 23

With the illuminators turned

The brightness of the IR illuminators cannot be observed when the scene is

on, no change in image

already illuminated with significant amounts of visible light.

brightness is observed

Check that the illuminators are on. When the illuminators turn on, there is a

 

visible red glow at the illuminators. The ZX700 illuminators have more of a red

 

glow when compared to the SLED illuminators. Do no look directly into the

 

illuminators to check for the red glow. The red glow can be observed by looking at

 

the illuminators from an angle.

 

Check that the illuminators are properly aligned. See the installation manual for

 

the IR illuminator alignment procedure.

 

Check that the lens IR filter is on (Aux 5 on) and that the camera is in night mode

 

(Aux 6 on). Both settings are required for IR sensitivity.

 

 

An auxiliary does not respond

When the auxiliaries do not respond to control input either the control boards are

to control input

not receiving communication or the auxiliary is malfunctioning. If the control

 

boards are not receiving communication, then:

 

– Check that the address on the controlling device matches the address of the

 

GVS1000.

 

– Check that the auxiliary control board is receiving valid protocol. The green

 

LED (LED 10) is blinking when valid communication is received by the

 

auxiliary control board.

 

If an auxiliary is malfunctioning, then turn on the board diagnostics mode (refer to

 

Section 5.2 Troubleshooting with Diagnostic Mode, page 23).

 

 

The system address or

When the system address or communication protocol is changed, it is

communication protocol does

recommended to power cycle the unit (or make the changes when power is off).

not take effect when changed

Instead of a power cycle, the reset switches can be pressed on the auxiliary and

 

camera control boards and, the green terminal blocks on the code translator can

 

be taken off and put back on again.

 

 

5.2Troubleshooting with Diagnostic Mode

In the auxiliary control board, change DIP1, Switch 6 to ON. The GVS1000 diagnostics mode is now active. The GVS1000 will cycle through all its auxiliaries and activating the appropriate LEDs corresponding to the auxiliaries. Then, the diagnostics will cycle through motor movements.

Observe the functionality of the GVS1000 during the self-test. The activation of auxiliaries corresponds with the appropriate LED turning on (see Section 6.2 Auxiliary Control Board, page 29 and Section 6.3 Auxiliary Controls, page 31). If the behavior of the auxiliary turning on deviates from the descriptions in Sections 6.2 and 6.3 then contact a Bosch service center.

Bosch Security Systems, Inc.

Operations Manual

F.01U.173.867 2.0 2010.11

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Global View Station Page Table of Contents En Table of ContentsGlobal View Station Important safety instructions 1SafetyEn Safety Global View Station Coax grounding Safety precautionsImportant notices Selv Rack-mountA. and Canadian Models Only FCC & Ices InformationMore information CopyrightTrademarks Customer Support and Service Zoom and Focus Control PresetsStandard Operations Pan/TiltSoft Limits Preset ToursAux 2 Wiper On/Off Auxiliary FunctionsAux 1 Doubler On/Off Aux 5 Lens IR Correction On/Off Aux 6 Camera Color/Mono ModeAux 3 Illuminator Control Aux 4 Iris ControlAux 8 Sled LED On/Off Aux 7 ZX700 On/OffPelco Support Code Translator Unit2Biphase Support Lock 4Camera Default ConfigurationDay/Night ModeSubmenu Function Value Shutter/AGCSubmenu Function Value Lens Wizard Installer MenuAlarm I/O General TroubleshootingTroubleshooting with Diagnostic Mode, 2Troubleshooting with Diagnostic ModePTCR-20 Software Operation Test SoftwarePTCR-20 Main Screen Using the PTCR-20 SoftwareUsing PTCR-20 to Set Soft Limits and Camera Control Default ParametersPTCR-20 Soft Limit Configuration Other Menus 3Inverting Tilt ControlsComponent Description Auxiliary Control BoardAddress Selection Reset ButtonSelf Test Diagnostic Function Photocell Control AdjustmentsAuxiliary Controls Voltage Touch Points DIP2 Camera Control Board6Termination Jumpers Camera Control Power IndicatorCN1 connection to lens Page Page Bosch Security Systems, Inc

GVS1000 specifications

Bosch Appliances has long been a trusted name in the realm of household appliances, synonymous with quality, performance, and innovation. One of its standout products is the Bosch GVS1000, a high-performance vacuum cleaner designed to meet the needs of modern households. Packed with advanced features, the GVS1000 promises to offer an efficient cleaning experience.

One of the main features of the Bosch GVS1000 is its powerful motor, which delivers impressive suction capabilities. This ensures that dirt, dust, and debris are effectively removed from various surfaces, including carpets, hardwood floors, and upholstery. The vacuum's lightweight design allows for easy maneuverability, making it ideal for both quick clean-ups and more extensive cleaning sessions.

A standout technology in the Bosch GVS1000 is its Bagless Cyclonic System. This innovative feature utilizes centrifugal force to separate dirt and dust from the air, resulting in consistent suction power and reduced maintenance. Users can easily empty the dust container with the touch of a button, eliminating the inconvenience of dealing with messy vacuum bags.

Another notable characteristic of the GVS1000 is its advanced filtration system, which includes a HEPA filter. This filter captures allergens and fine particles, making it an excellent choice for allergy sufferers. The GVS1000 is designed to enhance indoor air quality, trapping up to 99.97% of particles as small as 0.3 microns, ensuring a clean and healthy living environment.

The appliance's ergonomic design features a comfortable grip handle and a user-friendly interface, making it simple to operate. Multiple cleaning modes and adjustable suction settings cater to a variety of cleaning tasks, from delicate fabrics to stubborn debris, ensuring optimal performance for every job.

In terms of accessories, the Bosch GVS1000 comes equipped with a range of tools to enhance its versatility. These include a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for furniture, making it a comprehensive cleaning solution for any home.

Durability and a sleek aesthetic are additional characteristics of the Bosch GVS1000, allowing it to blend seamlessly with contemporary home decor while providing long-lasting performance. Overall, the Bosch GVS1000 stands out as a reliable, powerful, and efficient vacuum cleaner that effectively meets the demands of today’s households, redefining the cleaning experience with its innovative features and technologies.
Top Page Image Contents