Axis Communications M3007P user manual Media Streams, How to Stream H.264, Axis Media Control AMC

AXIS M3007–P

Media Streams

Media Streams

The Axis product provides several video stream formats. Your requirements and the properties of your network will determine the type you use.

The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream profiles. Other applications and clients can access video streams directly, without going via the Live View page.

How to Stream H.264

H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared with the Motion JPEG format and as much as 50% more than the MPEG-4 standard. This means that much less network bandwidth and storage space are required for a video file. Or seen another way, much higher video quality can be achieved for a given bit rate.

Deciding which combination of protocols and methods to use depends on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are:

Unicast RTP	This unicast method (RTP over UDP) is used
	for live unicast video, especially when it is
	important to always have an up-to-date video
	stream, even if some frames are dropped.		Unicasting is used for video-on-demand
RTP over RTSP	This unicast method (RTP tunneled over RTSP)		transmission so that there is no video traffic
			on the network until a client connects and
	is useful as it is relatively simple to configure
			requests the stream.
	firewalls to allow RTSP traffic.
			Note that there are a maximum of 20
RTP over RTSP over HTTP	This unicast method can be used to traverse		simultaneous unicast connections.
	firewalls. Firewalls are commonly configured	to
	allow the HTTP protocol, thus allowing RTP to
	be tunneled.
Multicast RTP	This method (RTP over UDP) should be used for live multicast video. The video stream is always
	up-to-date, even if some frames are dropped.
	Multicasting provides the most efficient usage of bandwidth when there are large numbers of
	clients viewing simultaneously. A multicast cannot however, pass a network router unless the
	router is configured to allow this. It is not possible to multicast over the Internet, for example.
	Note also that all multicast viewers count as one unicast viewer in the maximum total of 20
	simultaneous connections.

AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements.

Note

H.264 is licensed technology. The Axis product includes one H.264 viewing client license. Installing additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller.

MJPEG

This format uses standard JPEG still images for the video stream. These images are then displayed and updated at a rate sufficient to create a stream that shows constantly updated motion.

The Motion JPEG stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained in the stream. The recommended method of accessing Motion JPEG live video from the Axis product is to use the AXIS Media Control in Internet Explorer in Windows.

AXIS Media Control (AMC)

AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product.

12