Axis Communications M1113 Adjust image and focus, Axis M11 SeriesPage, To focus Axis M1103/M1104

AXIS M11 SeriesPage 11

Adjust image and focus

To focus AXIS M1103/M1104:
Unscrew the focus puller on the lens. Adjust the
focus as required. Re-tighten the focus puller.
Note: Grip the outer rim of the lens while focus-
sing (see Hardware overview, on page 4).
Gripping the whole lens could cause the	Focus puller
lens to come unscrewed.

To focus AXIS M1113/M1114:

1.Click the Setup link at the top, right in the camera’s web interface and go to Basic Setup > Focus.

2.In the Focus Adjustment page set the DC-Iris to Disabled and click Save.

3.Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom setting as required. Re-tighten the zoom puller.

4.Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller.

5.From the Focus Adjustment page, set the DC-Iris to Enabled and click Save.

ENGLISH

Notes:

•The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in all light conditions

•The design of AXIS M11 Series allows for slight lens movement to ensure sensor alignment.

Lens

Focus puller Zoom puller