Page 8 | AXIS M11 Series |
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection status, manage firmware upgrades and set IP addresses.
Automatic discovery
1.Check that the camera is connected to the network and that power has been applied.
2.Start AXIS Camera Management. When the camera appears in the window,
3.See page 9 for instructions on how to set the password.
Assign an IP address in a single device
1.Select the network camera in AXIS Camera Management and click
the Assign IP button .
2.Select Assign the following IP address and enter the IP address, subnet mask and default router the device will use.
3.Click the OK button.