Ieee, Certificates | Axis Communications M3007PV specs

Axis Communications M3007PV user manual Certificates, Go to System Options Security Ieee

AXIS M3007–PV

System Options

3.Optionally, click Ciphers and select the encryption algorithms to use for SSL.

4.Set the HTTPS Connection Policy for the different user groups.

5.Click Save to enable the settings.

To access the Axis product via the desired protocol, in the address field in a browser, enter https:// for the HTTPS protocol and http:// for the HTTP protocol.

The HTTPS port can be changed on the System Options > Network > TCP/IP > Advanced page.

IEEE 802.1X

IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol).

To access a network protected by IEEE 802.1X, devices must be authenticated. The authentication is performed by an authentication server, typically a RADIUS server, examples of which are FreeRADIUS and Microsoft Internet Authentication Service.

In Axis implementation, the Axis product and the authentication server identify themselves with digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security). The certificates are provided by a Certification Authority (CA). You need:

•a CA certificate to authenticate the authentication server.

•a CA-signed client certificate to authenticate the Axis product.

To create and install certificates, go to System Options > Security > Certificates . See Certificates on page 43. Many CA certificates are preinstalled.

To allow the product to access a network protected by IEEE 802.1X:

1.Go to System Options > Security > IEEE 802.1X.

2.Select a CA Certificate and a Client Certificate from the lists of installed certificates.

3.Under Settings, select the EAPOL version and provide the EAP identity associated with the client certificate.

4.Check the box to enable IEEE 802.1X and click Save.

Note

For authentication to work properly, the date and time settings in the Axis product should be synchronized with an NTP server. See Date & Time on page 44.

Certificates

Certificates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), network protection via IEEE 802.1X and secure upload of images and notification messages for example via email. Two types of certificates can be used with the Axis product:

Server/Client certificates - To authenticate the Axis product.

CA certificates - To authenticate peer certificates, for example the certificate of an authentication server in case the Axis product is connected to an IEEE 802.1X protected network.

Note

Installed certificates, except preinstalled CA certificates, will be deleted if the product is reset to factory default. Preinstalled CA certificates that have been deleted will be reinstalled.

A Server/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.