Axis Communications M1103 user manual Set Up the Product, Basic Setup, Focus Adjustment

AXIS M1103

Set Up the Product

Set Up the Product

The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.

•Administrators have unrestricted access to all settings.

•Operators have access to all settings except System Options

See also the online help .

Basic Setup

Basic Setup provides shortcuts to the settings that should be made before using the Axis product:

1.Users. See page 38.

2.TCP/IP. See page 40.

3.Date & Time. See page 40.

4.Video Stream. See page 16.

5.Focus. See

The Basic Setup menu can be disabled from System Options > Security > Users.

Focus Adjustment

To focus your Axis product:

1.Open the Live View page in a web browser.

2.Unscrew the focus puller on the lens by turning it counterclockwise. Adjust focus as required. Re-tighten the focus puller.

Back Focus Adjustment

If the lens is changed to a non-standard lens or when the focus achieved is not satisfactory, adjust the back focus as follows:

1.Loosen the screw that holds the CS-ring. See Hardware Overview on page 6

2.Direct the camera towards an object at least 7 meters away and check that it is possible to focus the camera.

3.Direct the camera towards a close object, about 30 cm away and check that it is possible to focus the camera.

4.If it is not possible to focus the camera in step 2 or 3, adjust the CS-ring and go back to step 2.

5.Gently tighten the screw to secure the CS-ring’s position.

6.Adjust the focus position for the desired view.

15