Axis Communications M1114 user manual Hardware Overview, Connectors and Buttons, Network Connector

Page 6

AXIS M1114

Hardware Overview

Hardware Overview

1.Network LED

2.Status LED

3.Power LED

4.Iris connector

5.Network connector

6.Control button

7.Zoom puller

8.Focus puller

9.Screw holding CS ring

Connectors and Buttons

For technical specifications, see page 52.

Network Connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

Control Button

For location of the control button, see Hardware Overview on page 6 .

The control button is used for:

•Resetting the product to factory default settings. See page 47.

•Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.

6

Image 6

Contents Axis M1114 Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M1114Performance Considerations Hardware Overview Connectors and ButtonsNetwork Connector Control ButtonStatus LED Indication LED IndicatorsPower LED Indication Network LED IndicationAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordSet Power Line Frequency Live ViewClick Create self-signed certificate Axis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis M1114 Focus Adjustment Set Up the ProductBasic Setup Back Focus AdjustmentPixel Counter VideoVideo Stream ImageClick Save to apply the new settings Stream Profiles264 View Area Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay ImageUse Overlay Text in an Action Rule Go to Events Action RulesPrivacy Mask Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Control Queue Operator Same as administrator but with lower priorityAdvanced ControlsMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis M1114 Applications Install ApplicationGo to Setup Applications Application LicensesAxis M1114 Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click AddTriggers ActionsGo to Events Recipients and click Add Add RecipientsRecipient Types Recipient Use with actionCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddAxis M1114 Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAxis Internet Dynamic DNS Service IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264Bonjour MaintenanceStorage Network ShareSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadEmergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Maintenance General Casing Function/group Specifications System ApplicationInstallation PowerPerformance Considerations M2.5

Related manuals

Manual 82 pages 28.95 Kb