Axis Communications M1114 LED Indicators, Status LED Indication, Network LED Indication

Page 7

AXIS M1114

Hardware Overview

LED Indicators

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

Status LED	Indication

Green	Steady green for normal operation.

Amber	Steady during startup and when restoring settings.

Red	Flashes red for firmware upgrade failure.

Network LED	Indication

Green	Steady for connection to a 100 Mbit/s network. Flashes for network activity.

Amber	Steady for connection to a 10 Mbit/s network. Flashes for network activity.

Unlit	No network connection.

Power LED	Indication

Green	Normal operation.

Amber	Flashes green/amber during firmware upgrade.

Image 7

Contents Axis M1114 Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis M1114 Table of ContentsPerformance Considerations Control Button Connectors and ButtonsNetwork Connector Hardware OverviewNetwork LED Indication LED IndicatorsPower LED Indication Status LED IndicationSet the Root Password Access the ProductAccess from a Browser Access from the InternetLive View Set Power Line FrequencyClick Create self-signed certificate Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarPTZ Controls Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis M1114 Back Focus Adjustment Set Up the ProductBasic Setup Focus AdjustmentImage VideoVideo Stream Pixel CounterStream Profiles Click Save to apply the new settings264 Image Appearance Camera SettingsExposure Settings View AreaGo to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tabGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGuard Tour Controls Operator Same as administrator but with lower priorityAdvanced Control QueueGo to Detectors Camera Tampering DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis M1114 Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis M1114 Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesActions TriggersRecipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click AddGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesAxis M1114 Go to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Axis Internet Dynamic DNS ServiceHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4RTP/H.264 QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMNetwork Share MaintenanceStorage BonjourLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Power Function/group Specifications System ApplicationInstallation Maintenance General CasingPerformance Considerations M2.5

Related manuals

Manual 82 pages 28.95 Kb