Bosch Appliances REG-D1 installation instructions Vari-Focal and Auto-Iris Control Adjustments

Page 19

4.1Vari-Focal and “Auto-Iris” Control Adjustments

Step 4.1.1 - Loosen the lens set screws for focus/zoom adjustments.

Step 4.1.2 - The set screw with no mark is used for image focus.

Step 4.1.3 - The set screw marked T←→ W is used for telephoto or wide-angle settings.

Step 4.1.4 - Re-tighten the set screws after focus adjustments have been completed.

Step 4.1.5 - Locate the “Auto-Iris” adjustment.

Step 4.1.6 - After adjustments are complete, re-install the Camera lens back on to the camera assembly

- 13 -

Image 19

Contents Installation Instructions Important Safety Instructions Page 89/336/EEC Electromagnetic Compatibility Directive Page Index REG D1 Camera Description Unpacking Guidelines Initial PreparationsGeneral Mechanical Specifications Mechanical SPECIFICATIONS-REG D1Power and Video Connections Input Power / Video Output ConnectionsMounting Specification REG-D1 Range Chart Maximum Vertical Angle Maximum Horizontal Angle Color Overview Camera Lens Setting Rear Housing Removal Remove Cap screw Loosen lens Vari-Focal and Auto-Iris Control Adjustments Problem Possible Likely Solution Cause Troubleshooting GuidePage Poor Color Picture Quality Safety and Precaution General Specifications Page Page Page Asia-Pacific