Axis Communications axis fixed dome network camera LED Indicators, Network, Heater, Status, Power

Page 6

AXIS 225FD - Product Features

Power connector block - for connection of a power supply. See Power connections, on page 36.

I/O terminal connector - The I/O terminal connector provides the physical interface to one solid state relay output, two digital inputs, RS-485/422 and GND. For more information, see Unit Connectors, on page 35.

Network connector - The AXIS 225FD connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 225FD via PoE (Power over Ethernet). The camera also negotiates the correct power level when using PoE.

Serial Number - This number is used during installation.

Control Button - This button is used during the installation using the AXIS Internet Dynamic DNS Service (see the Installation Guide) or to restore the factory default settings, as described in Advanced, on page 33.

LED Indicators

After completion of the startup and self test routines, the multi-colored Network, Status, Heater, and Power LED indicators flash as follows:

		Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.

	Network	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.

		Red	Flashes rapid red, together with the Status indicator, for hardware error.
		Red

		Unlit	No connection.

		Green	Shows steady green if the connected power supply can deliver the correct voltage for
	Heater		the heater (See Power, on page 42 of Technical Specifications).

		Red	Shows steady red if the connected power supply cannot deliver the correct voltage (i.e.,
		Red
			the voltage is either too high or too low).

		Green	Shows steady green for normal operation. Can be configured to flash green at intervals
			whenever the camera is accessed. See the online help for more information.

	Status	Amber	Shows steady amber during reset to factory default or when restoring settings.

		Red	Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 38).
		Red
			Rapid flash, together with the Network indicator, for hardware error.

		Unlit	When configured for “no flash” on camera access.

	Power	Green	Normal operation.

		Amber	Flashes green/amber during firmware upgrade.
		Amber	Flashes green/amber during firmware upgrade.

6

Image 6

Contents Axis 225FD About this Document Contents Glossary of Terms Index Product Features Key FeaturesOverview Network LED IndicatorsPower HeaterAccessing the Camera Access From a BrowserSetting the Root Password Setting the Focus/Zoom Accessing the camera from the InternetThese are configured under Setup Live View Config Layout Live ViewVideo Streams Video Stream TypesMotion Jpeg Axis Media Control How to stream MPEG-4MPEG-4 protocols and communication methods RTP/RTSP/HTTP or RTP/RTSP/HTTPSOther methods of accessing the video stream Other MPEG-4 clientsSetup Tools Accessing the setup tools from a browserVideo and Image Settings Image SettingsUpload and use an overlay/mask Overlay/Mask SettingsOverlay/Mask Type Overlay image/privacy mask requirementsAdvanced Settings Camera SettingsMPEG-4 Settings Mjpeg SettingsLive View Config Use custom settingsUpload Own Web Files Own home Default Video FormatDefault Viewer User-defined LinksHtml Examples Sequence ModeViewer settings External VideoEvent Servers Event ConfigurationConfiguring Event Types DefinitionsClick Add triggered... on the Event Types How to set up a triggered eventTriggered Event Pre-trigger and Post-trigger buffersSettings Camera TamperingMotion Detection Port Status Object SizeSecurity IP Address Filtering System OptionsSecurity Users ReferralsAuthentication process SecurityServices Network Basic TCP/IP SettingsIP Address Configuration Date & TimeNTP Configuration Network Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNetwork Socks NAT TraversalNetwork Traffic Network Snmp Network QoS Quality of ServiceNetwork Smtp email Network UPnPNetwork Bonjour LED SettingsMaintenance Ports & DevicesSupport AdvancedAbout Resetting to the Factory Default Settings Using the Control ButtonUnit Connectors Terminal connector block pinoutTerminal Block Terminal connector schematic diagram LED indicatorsPower connections Power Connector BlockSchematic Diagram Power Terminal Block and Power Connectors Pin FunctionChecking the Firmware TroubleshootingEmergency Recovery Procedure Upgrading the FirmwareSymptoms, Possible Causes and Remedial Actions Axis SupportPoor quality snapshot images Video/Image problems generalStatus and Network indicator LEDs are flashing red rapidly Browser freezesProblems uploading files Overlay is not displayedTechnical Specifications LensMaintenance General performance considerations Optimizing your systemFrame rates Motion Jpeg and MPEG-4 BandwidthGlossary of Terms Smtp a common e-mail protocolAxis 225FD Glossary of Terms Index Axis 225FD IndexRtsp