Axis Communications axis fixed dome network camera user manual Live View

Page 9

AXIS 225FD - Accessing the Camera

The Live View Page

Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible.

The Video Format drop-down list allows the video format on the Live View page to be temporarily changed.

The Output buttons, Pulse and Active/Inactive below, control the output directly from the Live View page. These buttons are configured under Setup > Live View Config > Layout.

Pulse - click this button to activate the output for a defined period of time, e.g. to switch on a light for 20 seconds.

Active/Inactive - click these buttons to manually start and stop a connected device, e.g. switch a light on/off.

These buttons start and stop the Sequence Mode. This mode is created in Setup > Live View Config > Sequence mode, and automatically displays the view from 2 or more video sources at set intervals.

From the Source list, select the desired external video source. Note that Sequence Mode must be stopped before selecting a source from this list.

The Trigger buttons can trigger an event directly from the Live View page.

These are configured under Setup > Live View Config > Layout.

The Snapshot button saves a snapshot of the image currently being displayed. Right-click on the video image to save it in JPEG format on your computer. This button is intended for use when the AMC viewer toolbar is not available.

The AMC (AXIS Media Control) viewer toolbar is available in Microsoft Internet Explorer only. It displays the following buttons:

Play/Stop button - starts and stops the live video stream.

The Snapshot button saves a snapshot of the video image currently being displayed. The Snapshot function and the target directory for saving snapshots can be configured from the AMC Control Applet in the Windows Control Panel (Internet Explorer only).

The record button is used to record the current (MPEG-4) video stream. The location where the image file is saved can be specified using the AMC control panel. To enable recording, Select Live View Config > Viewer Settings > Enable recording button.

Click the View Full Screen button to make the video image fill the entire screen area. No other windows will be visible. Press Esc (Escape) on the computer keyboard to exit full screen.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Axis 225FD About this Document Contents Glossary of Terms Index Product Features Key FeaturesOverview Power LED IndicatorsNetwork HeaterAccessing the Camera Access From a BrowserSetting the Root Password Accessing the camera from the Internet Setting the Focus/ZoomLive View These are configured under Setup Live View Config LayoutVideo Streams Video Stream TypesMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4Axis Media Control RTP/RTSP/HTTP or RTP/RTSP/HTTPSOther MPEG-4 clients Other methods of accessing the video streamAccessing the setup tools from a browser Setup ToolsImage Settings Video and Image SettingsOverlay/Mask Type Overlay/Mask SettingsUpload and use an overlay/mask Overlay image/privacy mask requirementsCamera Settings Advanced SettingsMjpeg Settings MPEG-4 SettingsLive View Config Use custom settingsUpload Own Web Files Default Viewer Default Video FormatOwn home User-defined LinksViewer settings Sequence ModeHtml Examples External VideoConfiguring Event Types Event ConfigurationEvent Servers DefinitionsTriggered Event How to set up a triggered eventClick Add triggered... on the Event Types Pre-trigger and Post-trigger buffersCamera Tampering SettingsMotion Detection Object Size Port StatusSecurity Users System OptionsSecurity IP Address Filtering ReferralsSecurity Authentication processIP Address Configuration Network Basic TCP/IP SettingsServices Date & TimeDNS Configuration Network Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationNetwork Socks NAT TraversalNetwork Traffic Network Smtp email Network QoS Quality of ServiceNetwork Snmp Network UPnPMaintenance LED SettingsNetwork Bonjour Ports & DevicesSupport AdvancedAbout Using the Control Button Resetting to the Factory Default SettingsUnit Connectors Terminal connector block pinoutTerminal Block Power connections LED indicatorsTerminal connector schematic diagram Power Connector BlockPin Function Schematic Diagram Power Terminal Block and Power ConnectorsEmergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareAxis Support Symptoms, Possible Causes and Remedial ActionsStatus and Network indicator LEDs are flashing red rapidly Video/Image problems generalPoor quality snapshot images Browser freezesOverlay is not displayed Problems uploading filesLens Technical SpecificationsMaintenance Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Smtp a common e-mail protocol Glossary of TermsAxis 225FD Glossary of Terms Axis 225FD Index IndexRtsp
Top Page Image Contents