1200 Series IP Video Storage System | Chassis Setup and Maintenance en 13 |
|
|
| 10. If desired, each hard drive carrier may be secured to the exterior of the hard drive cage |
| using optional screws. |
| 11. Rotate the hard drive cage 90 degrees inward, returning it to the closed, operational |
| position in the chassis. |
| 12. Connect the related cables to the hard drives. |
5.4 | Installing the I/O Shield and Motherboard |
| Motherboard problems will be handled by trained support people only. |
5.5 | Installing the System Fan |
| System fan problems will be handled by trained support people only. If the system fan has to |
| be replaced the entire unit will be exchanged (advanced exchange service). |
| Note: The fan noise of the system is a factor to note. When it occurs, this can be an indication |
| of impending failure of the fan and should be replaced. |
5.6 | Power Supply |
| Power Supply Failure problems will be handled by trained support people only. If the power |
| supply has to be replaced the entire unit will be exchanged (advanced exchange service). |
Bosch Sicherheitssysteme GmbH | Installation Manual | DOC V1 2010.08 |