Panasonic GP-KS162CUD Preparations, GP-KS162H with GP-LM3TA, GP-LM7TA, GP-LM15TA or GP-LP12TA

PREPARATIONS

Caution: Keep the Power ON/OFF Switch of the camera in the OFF position through the installation.

GP-KS162H with GP-LM3TA, GP-LM7TA, GP-LM15TA or GP-LP12TA

1.Remove the front cap of the camera and confirm that the surface of the optical filter of the camera head is clean.

Front Cap

If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film cam- era lenses (may be available at your local camera store) or supplied lens cleaning tissue paper.

2.Rotate the focus lock ring fully clockwise.

Mount the Pinhole Lens, Wide-angle Lens or Super Wide-angle Lens to the camera by rotating it clockwise slowly.

Focus Lock Ring

GP-KS162H with GP-AD22TA and optional C-mount lens

1.Remove the front cap of the camera head and confirm that the surface of the optical filter of the camera head is clean.

Front Cap

If the surface of the optical filter is dirty or dusts are on it, clean it up with a blower brush which is for film cam- era lenses (may be available at your local camera store) or supplied lens cleaning paper.

2.Attach the optional C-mount lens to the C-mount Adaptor GP-AD22TA by rotating it clockwise.

3.Rotate the focus lock ring fully

Mount the lens and C-mount adaptor by rotating them clockwise slowly.

Focus Lock Ring

Caution: If the optional C-mount lens size exceeds 2”(50.8 mm) in diameter, 2-3/4” (70 mm) in length and 0.66 lbs (300g) in weight, both the camera and lens should be secured.

-6-