Panasonic GP-KS162CUD manual Preface, Features With GP-KS162 H

Page 3

PREFACE

The Panasonic Camera Control Unit GP-KS162CU is designed to use with the optional Camera Head GP- KS162H.

This system overcomes space limitations that have compli- cated many video applications. Weight of only 0.04 lbs (16 g), this remarkably compact CCTV camera measures only two-thirds of an inch in diameter and less than two inches in length. GP-KS162CU Remote Control Unit (CCU) and optional camera head GP-KS162H can be extended up to 33 feet(10-meter) away, using an optional 33-feet (10- meter) cable. So the exceptionally manueurable GP-KS162 series lets you obtain a whole new world of camera angles and shots that were once quite difficult to achieve. With the 380,000-element, 1/2-inch CCD pick-up device, horizontal resolution is more than 480 lines, and signal-to-noise ratio is 50 dB. An Auto Light Selection Switch and lets you obtain clear, high-quality color images in light as low as 0.3 foot- candle (3 lux at F1.4).

In addition, a small diameter wide-angle lens developed by Matsushita makes high resolution standard even with sub- jects as close as 4/5th of an inch away.

Color changes are sensed instantly and compensated for by a microcomputer in the GP-KS162CU. Proper white bal- ance is then obtained via the built-in-Auto Tracing White Balance (ATW) circuit. Both White Balance and R and B color can also be adjusted manually, for optimum color reproduction.

The camera head can be used with most existing camera systems. And VTR, video printer or floppy disk recorder, for a host of new and traditional applications.

FEATURES (With GP-KS162 H)

1.1/2 inch Interline CCD image sensor with 768 (H) x 492

(V) pixels.

2.480 lines of horizontal resolution.

3.0.3 footcandle (3 lux) at F1.4 of minimum scene illumi- nation.

4.50 dB of signal to noise ratio.

5.Selectable trough the Lens Auto Tracing White Balance (ATW), Auto White Balance Control (AWC) or Manual White Balance Control.

6.Auto Light Control Switch enables to control the video output level to constant level whatever the object brightness may be.

7.Video Level Control enables to adjust the video level to your preference.

8.The preset 1, preset 2 and automatic setting mode are provided for Back Light Compensation (BLC) function.

9.2-memory AWC mode is available.

10.DC 12V operation

11.33-feet (10-meter) of maximum cable length between camera head and camera control unit with optional camera cable.

12.S-VHS Video Output is provided.

-1-

Image 3
Contents GP-KS162CUD Contents Preface Features With GP-KS162 HPrecautions Optional Camera Head GP-KS162H with Optional Lens GP-LM7TA System Block DiagramMajor Operating Controls and Their Functions Camera Control Unit GP-KS162CUAuto Light OFF Camera Head GP-KS162H Option Electronic Light Control ELC On/Off SwitchPreparations GP-KS162H with GP-LM3TA, GP-LM7TA, GP-LM15TA or GP-LP12TAGP-KS162H with GP-AD22TA and optional C-mount lens Optional Accessories Industrial Camera Division