PRECAUTIONS
•Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or cover. There are no
•Do not expose the camera or camera control unit to rain or moisture, or do not try to operate it in wet areas. Do take immediate action if ever the camera or camera control unit do become wet. Turn power off and refer servicing to qualified service personnel.
Moisture can damage the camera and camera control unit and also create the danger of electric shock.
•Ambient Temperature range
Do not install the camera in the place which is beyond 14 °F - 104 °F (− 10°C - +40 °C).
•Do not drop anything inside the camera.
Dropping metal for example inside the camera could permanently damage the unit.
•Never crush or pinch the camera cable.
Do not bend the camera cable into a curve whose radius is too small.
•Never face the camera is in use, never face it toward the sun.
•Never face the camera toward the sun
whether the camera is in use or not, never face it toward the sun.
Do use caution when operating the camera in the vicin- ity of spot lights or other lights and light reflecting objects.
•How to take care of this camera.
After turning OFF the Power ON/OFF Switch, clean it with a dry cloth. If it is difficult to remove the dirt or dust, clean it up with a cloth applied the neutral cleanser.
Use the lens cleaning tissue paper(may be available at your local camera store) for lens cleaning.
•Connect this to a DC12V, 0.5 A - 0.7 A CLASS 2 Power supply only.
•After using the camera, turn OFF the power ON/OFF Switch and put the lens cap on the camera head.
•Every necessary procedures with regard to install this product should be made by qualified service person- nel or system installers.
Caution:
Connecting or disconnecting camera cable to/from the camera control unit must be done after turning OFF the Power ON/OFF Switch. Otherwise, the camera head may be damaged.