Installation/Troubleshooting
4.Enter ISP Name.
•Enter no more than 20 characters. In the example right, "abcde" has been entered.
5.Enter the IP Address, Subnet Mask, Gateway and DNS server 1, 2, and if specified by the ISP, enter the Domain Name.
•See the ISP's setup information. To return to the original settings, click [Cancel].
6.When setup is complete, click [Save and Go to Connection Mode].
• The connection mode page is displayed.
7.
8.
Select the ISP entered in step 4.
When setup is complete, click [Save].
•The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page, click it.
10.Restart the PC.
•Check that the PC is connected to the Internet.
Notes
•When registering or editing, restart all PCs connected to the LAN (home) side.
•When adding more PCs after setup has been completed, connect the new PCs to jacks LAN1 to LAN4 and then restart.
22