Panasonic BB-HGW700A Connect a Network Camera, Camera Automatic Setup

Installation/Troubleshooting

2.6Connect a Network Camera

To the modem

To the PC

To the outlet

2.

1.3.

1.Connect the Ethernet cable between the camera and the LAN jack of the router.

2.Insert the AC adaptor cord into the DC IN jack of the camera.

3.Insert the AC cord into the AC adaptor socket and the plug into an outlet (The camera will be turned on automatically.)

Camera Automatic Setup

If a Panasonic Network Camera (Customer-provided) is connected and the power turned on, this product automatically sets the IP address, subnet mask and other network settings. After this product is connected to the Internet, check that the camera is turned off and follow the steps above.

[For assistance, please call: 1-800-272-7033] 23