Axis Communications Axis 211, Axis 210A manual Adjust the image and focus

Page 11

AXIS 210/210A/211/211A Installation GuidePage 11

Adjust the image and focus

To focus the AXIS 210/210A,

Focus puller

unscrew the focus puller on

 

the lens. Adjust the focus as

 

required. Re-tighten the focus

 

puller.

 

To focus the AXIS 211/211A follow the instructions below.

1.From the Basic Configura- tion page in the setup tools, open the Focus adjustment page.

2.Set the DC-Iris to Disabled and click Save.

3.Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom setting as required. Re-tighten the zoom puller.

Zoom puller (Tele/wide)

Focus puller

ENGLISH

4.Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller.

5.From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.

Accessing the AXIS 210/210A/211/211A from the Internet

Once installed, your AXIS 210/210A/211/211A is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup

Image 11
Contents Axis 210/210A/211/211A Network Camera Installation Guide Page Package contents Installation stepsUnderside Hardware overviewAxis 210/AXIS 210A Rear panel DimensionsConnect the camera Install the hardwareMethod Recommended for Assign an IP addressAssign the IP address manually Axis IP Utility single camera/small installationAutomatic discovery Set the IP address in multiple devices Axis Camera Management multiple cameras/large installationsSet the password Accessing the Axis 210/210A/211/211A from the Internet Adjust the image and focusLanguage interface Go to Setup LanguageSet the IP address with ARP/Ping Other methods of assigning the IP addressUnit connectors Function SpecificationsColor Indication Connection diagramLED indicators Further information Resetting to the Factory Default SettingsPage Article Modèles/variantes/remarques Étapes de linstallationContenu de lemballage Vue de dessous Présentation du matérielFace arrière Connectez la caméra Installation du matérielParamétrage dune adresse IP Méthode Recommandée pour Système DexploitationDéfinissez manuellement ladresse IP Axis IP Utility Une seule caméra/petite installationDétection automatique Paramétrer ladresse IP sur plusieurs appareils Définition du mot de passe Réglage de la mise au point Interface de langue Accès à la caméra Axis 210/210A/211/211A depuis InternetDéfinition de ladresse IP à laide dARP/Ping Autres méthodes de définition de ladresse IPConnecteurs de lunité Remarques NuméroTémoin Couleur Indication Diagramme de connexionTémoins DEL Plus dinformations Rétablissement des paramètres dusine par défautPage Komponente Modelle/Varianten/Anmerkungen InstallationsschritteLieferumfang Unterseite HardwareübersichtAbmessungen RückseiteKamera anschließen Hardware installierenMethode Empfohlen für Betriebssystem Legen Sie eine IP-Adresse festIP-Adresse manuell festlegen Axis IP Utility Einzelne Kamera/Kleine InstallationAutomatische Erkennung IP-Adresse für mehrere Geräte festlegen Axis Camera Management Mehrere Kameras/Große InstallationKennwort festlegen Auf die Axis 210/210A/211/211A vom Internet aus zugreifen Bildschärfe einstellenSprachoberfläche Wählen Sie Setup Language SpracheIP-Adresse per ARP/Ping zuweisen Andere Methoden zum Festlegen der IP-AdresseKameraanschlüsse Funktion Hinweise Technische Daten Farbe Bedeutung AnschlussschaltbildLED-Anzeigen Weitere Informationen Werkseitige Standardeinstellungen wiederherstellenPage Articolo Modello/varianti/note Procedura di installazioneContenuto della confezione Etichetta lato inferiore Panoramica dell’hardwarePannello posteriore DimensioniCollegare la videocamera Installazione dellhardwareMetodo Consigliato per… Impostazione di un indirizzo IPImpostazione manuale dellindirizzo IP Axis IP Utility videocamera singola/piccole installazioniRilevamento automatico Impostazione dellindirizzo IP di più videocamere Axis Camera Management più videocamere/grandi installazioniImpostazione della password Pagina Regolazione messa Accesso allAXIS 210/210A/211/211A da InternetRegolazione della messa a fuoco Andare su Impostazioni Lingua Lingua dellinterfacciaImpostazione dellindirizzo IP con ARP/Ping Altri metodi di impostazione dell’indirizzo IPConnettori Pin NumeroSpecifiche Colore Indicazione Schema delle connessioniIndicatori LED Ulteriori informazioni Ripristino delle impostazioni di fabbricaPage Artículo Modelos/variantes/notas Pasos de instalaciónContenido del paquete Parte inferior Presentación del hardwarePanel posterior DimensionesConexión de la cámera Instalación del hardwareMétodo Recomendado para Configuración de una dirección IPDetección automática Configuración manual de la dirección IPConfiguración de la dirección IP en varios dispositivos Configuración de la contraseña Acceso a la Axis 210/210A/211/211A desde Internet Ajuste del enfoqueIdioma de la interfaz Vaya a Configuración IdiomaConfiguración de la dirección IP con ARP/Ping Otros métodos para configurar la dirección IPConectores Número de Función Notas Especificaciones Pin Color Indicación Diagrama de conexionesIndicadores LED Más información Reconfiguración a los valores iniciales

Axis 210A, Axis 210, Axis 211 specifications

Axis Communications is a pioneering manufacturer of network video solutions, known for its commitment to high-quality technology and innovative designs. Among its extensive range of products are the Axis 211, Axis 210, and Axis 210A network cameras, each offering unique features and specifications tailored for different surveillance needs.

The Axis 211 network camera is designed for versatility and adaptability in various environments. It features a high-quality video resolution, capable of delivering crisp and clear images. This camera supports both MPEG-4 and Motion JPEG compression formats, allowing for efficient storage and bandwidth management. Additionally, the Axis 211 is equipped with built-in Power over Ethernet (PoE) technology, simplifying installation by reducing the amount of cabling required. Users can also take advantage of its built-in web server, enabling remote access to the camera through a standard web browser.

The Axis 210 camera provides a compact and cost-effective solution for basic surveillance needs. It boasts a resolution of up to 640x480 pixels, making it ideal for monitoring smaller areas or low-traffic locations. The Axis 210 also offers flexible installation options with its lightweight design and PoE compatibility. The camera is equipped with a built-in web server, offering users a user-friendly interface for setting up and managing their surveillance feeds remotely. Additionally, its robust motion detection capabilities provide alerts, making it a reliable choice for securing premises.

For those seeking enhanced features, the Axis 210A camera incorporates audio capabilities, allowing for two-way communication. This model is suitable for environments where audio monitoring and interaction are crucial. Like the other models, the Axis 210A supports both MPEG-4 and Motion JPEG video formats, ensuring that users can achieve the desired balance between video quality and file size. Its compact design and PoE support make it easy to install in various locations, and the built-in web server offers intuitive access to camera settings.

Overall, the Axis 211, Axis 210, and Axis 210A network cameras exemplify Axis Communications' focus on quality, functionality, and user-friendliness. With features like video compression options, remote accessibility, and PoE technology, these models cater to a variety of surveillance needs across different environments, ensuring users have the right tools to maintain security effectively.