290A Installation Instructions | 1 |
Unpacking
In the box with the 290A housing you will find a small plastic bag containing:
1 | 2 | No. |
| |
1. | One large allen key | |||
|
| |||
3 |
| 2. | One small allen key | |
|
| 3. | Two locking screws | |
|
| 4. | Four M8 wall fixings | |
4 | 5 | 5. | Four plugs (11x50 mm) for use in solid walls |
Fitting the camera inside the housing
Recommendation: Fit the camera in indoor conditions to prevent the
1.Open the housing by releasing the two clips on the side.
2.Undo the two screws (6) on the
camera mounting board (7). Slide
the board backwards and lift it 6 out.
3.Refer to the Axis Installation Guide provided with the Axis camera for instructions on camera hardware installation.
7