8 | 290A Installation Instructions |
Maintenance
Annual maintenance is required to inspect all visible seals for wear and damage. Worn or damaged seals should be replaced.
Recommendation: Treat all visible seals with silicone at least once a year to prevent them from drying out and to aid opening and closing of the housing. Use an
Clean the housing with a damp cloth only (not on the window). Do not use chemicals to clean the housing as this may affect the powder coat finish. The window should only be cleaned with a dry cloth.
Burnt fuses in the fused terminal block can be replaced to reinstate the power supply of the camera. Use a 5A, 250 VAC fuse and ensure that the mains is disconnected before beginning.
Specifications
•Weatherproof to IP66
•CE
•Power requirement:
•Operating temperature:
•Approximate weight: 3.2 kg (7.1 lbs)
•Color: RAL 9002 grey white
•Specifications may change without prior notice.
Warning: The housing should not be installed in areas that are subject to many hours of direct sunlight as this may overheat and damage the camera beyond repair. The maximum temperature inside the housing should never exceed 50°C (122F).
INSTAL GUIDE HOUSING ENV WHITE r3.1 | January 2007 |
Copyright © Axis Communications AB, 2007 | Part No. 28432 |
|
|