3-7) NETWORK SETTING function and setting method
•Static
•DHCP
•ADSL (PPPoE)
•Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting.
•Setting method: Move to #7, NETWORK SETUP MENU by using ▲/▼ KEY at SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below.
(The figure shows the initial setting status)
06/01/03 |
| 13:14:00 |
NETWORK SETTING |
| |
1. NETWORK ACCESS | STATIC.../DHCP.../PPPoE... | |
2. HTTP PORT | 00080 | |
NETWORK STATUS |
| |
IP | ADDR | 192.168.1.200 |
GATEWAY | 192.168.1.65 | |
SUBNETMASK | 255.255.255.0 | |
DNS 1 |
| 168.126.63.001 |
DNS 2 |
| 168.126.63.002 |
MAC ADDR | 00:30:6f:ff:00:00 | |
|
|
|
MOVE TO EACH item by using ▲/▼ KEY, and using / KEY change the set value.
Static IP User
- Constituted by Static IP on the TCP/IP network
1)Move to ‘STATIC...’ by using ▲/▼ KEY at NETWORK ACCESS, then press ENTER SWITCH to set STATIC...
(STATIC : Select in case the network configuration of monitor is fixed IP (Public or Private IP)
06/01/03 |
| 13:14:00 |
STATIC ACCESS |
| |
IP | ADDR | 192.168.1.200 |
GATEWAY | 192.168.1.65 | |
SUBNETMASK | 255.255.255.0 | |
DNS 1 |
| 168.126.63.001 |
DNS 2 |
| 168.126.63.002 |
|
|
|
2)Move to IP ADDR / GATEWAY / SUBNETMASK by using ▲/▼ KEY.
3)Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively.
4)DNS 1 and DNS 2 will be automatically set to DNS as shown above.
Use / KEY to change it.