2-8) PIP- KEY
Can be used to see the main screen while Single screen is displayed. The main screen can be changed and transfered to another channel while PIP is working. Please refer to "CHAPTER 4. DISPLAY MODE setting
2-9) FREEZE- KEY
This key allows users to see a target camera picture at PAUSE MODE. If users select the camera with the ▲/▼ KEY, and press the FREEZE BUTTON, the OSD “ I I ” will be displayed on pause picture from the camera. Other FRONT KEY input is ignored at FREEZE MODE, and other FRONT KEY inputs will be available only after the FREEZE MODE is cancelled.
2-10) SEQUENCE- KEY
It makes a picture switch sequentially. This means that display the picture will be displayed during the DWELL TIME
2-11) ZOOM- KEY
It zooms a part of a picture doubling it in the display. If the ZOOM BUTTON is pressed, zoom area will be displayed. Users can move to a target area by using ▲/▼ KEY at this time. If ENTER SWITCH is pressed at the target area, the area will be displayed with 2 times larger.
2-12) POWER- KEY
It turns ON/OFF the power of the monitor and camera at the same time.
In case the monitor power is ON, LED of monitor front is lit and the monitor is displayed in color bar pattern. For a while, the OSD “SYSTEM INITIALIZED...” will be displayed with blue pattern during twenty eight second - s or so.