4-5) ZOOM MODE DISPLAY
When users want to see zoomed image of a specific area of the display, press the ZOOM KEY in the front to display zoom selection area. Select zoom target area by using ▲/▼ KEY, and press the ENTER SWITCH, then, the selected area will be displayed at full single mode with zoomed area doubled. At zoom function operation at SINGLE DISPLAY MODE (CH2), the operation will be carried out as shown in figure below. (Zoom selection areas at SINGLE DISPLAY MODE are nine.)
06/01/0313:14:0006/01/0313:14:00
| ➯ |
|
| Press ZOOM |
|
CH2 | KEY | CH2 |
| ||
CH2 SINGLE DISPLAY |
| ZOOM area is activated. |
|
| ➯ |
06/01/03 | 13:14:00 | 06/01/03 |
13:14:00
➯ | |
Press | ENTER |
| key |
| CH2 |
The selected area will be doubled | Press▲/▼ KEY and move to |
and at FULL DISPLAY. | desired location |
| |