Samba Network Drive: Select to use Samba.
Samba Auth: Select the type of authentication from the
User Name: Enter your Samba user name.
Password/Confirm: Enter your Samba password and again to confirm it.
Server: Enter the URL or IP address of the Samba drive.
Shared Folder: Enter the shared folder name.
Test: Click Test to verify your settings are correct.
Resolution: Select the profile from the
When Storage is Full: Select Stop Recording to stop when you are out of hard drive space, specified in the Record until... option above; or select Overwrite older recordings to have the camera continue recording but will overwrite old data.
Event Based: Select the Motion detection triggered recording option to start recording when there is motion detected.
Prerecord Seconds: With the prerecord setting, the camera begin recording for a preset amount of time before motion was triggered is recorded to the drive.
Postrecord Seconds: This setting enables the camera to record after a motion detection event has occurred. It records for a preset amount of time after the event has been triggered, even though the motion may have ceased.
Scheduled: You can program recording to turn on and off at specific time each day.
Continuous: Select this option to record video all the time (Samba only).
Scheduled: Select this option to record video based on the scheduled period of time (Samba only).
56 |