D-Link DCS-5635, DCS-5605 manual Reset and Restore, Reset Button

Page 87

Reset and Restore

There is a button hidden in the pinhole beside the Ethernet socket. It is used to reset the system or restore the factory default settings. Sometimes resetting the DCS-5605/DCS-5635 will return the system back to a normal state. If the system still has problems after reset, restore the factory settings and install again:

RESET:

1.Lightly insert a paper clip (or a similar sized tool) into the reset hole on the back of the camera, press lightly and then release the button.

2.The LED on the front of the camera will begin blinking red and green.

3.When the LED stops the blinking the reset has completed.

RESTORE:

1.Insert the paperclip or other tool and press on the button continuously.

2.Wait for the LED on the front of the camera to blink red and green and hold the button through two cycles of blinking (about 5-7 seconds.)

3.Withdraw the tool after the second cycle of the LED blinking and a factory restore has been completed.

Restoring the factory defaults will result in the loss of any previous settings and will require running the Installation Wizard to return the DCS-5605/DCS-5635 to a normal state.

Reset Button

D-Link DCS-5605/DCS-5635 User Manual

86

Page 86 Page 88
Image 87
Page 86 Page 88
Contents Page Table of Contents Page Package Contents Introduction HIGH-PERFORMANCE Surveillance SolutionPage Rear Hardware OverviewFront Camera Installation Installation Wizard Page Page Page Page Page Page Click Install to continue Click Finish Page Page Click Next to continue Page Mounting Page Page Using the Camera with a Router Configuration Live Video Overview Page Setup Connection SetupDetection Setup Internet Connection Setup Wizard Page Page Click Apply to finish Network Setup Forwarding LAN SettingsPort Settings Https settings Wireless Setup DCS-5635 only Channel Auto Authentication WPK2-PSK Encryption Tkip Setting up a Wireless Connection with WPS Dynamic Ddns Image Setup Back Light Preferred ModeAuto Gain ControlVideo Profiles Audio and VideoPage Sensitivity Motion DetectionDrawing Mode Click the Motion Detection Setup Wizard button Motion Detection Setup WizardClick the Enable Video Motion box Page Page Time and Date Preset Position Positions Patrol PositionRecording Samba Network Drive Select to use Samba Snapshot Snapshot Mail SettingFTP Setting SD Card ICR AdvancedExternal I/O Port Connector Definition for the CameraConnector Digital OutputExternal Trigger Configuration Under Recording Method, select Event Based and then select Page Page Admin MaintenanceDevice/PT Setting System Firmware Upgrade Device Info StatusLog Help Appendix Frequently Asked QuestionsPage Noisy images occur. How can I solve the problem? How to Ping Your IP Address Using & Configuring 3G Compatible Cell Phones Select Open Select RealPlayer Play from RealPlayerSelect Open Press Options Select DownloadSelect Navigation Options Select Go to web address Page Play from PVPlayer Select Open Reset Button Reset and RestoreEnabling UPnP for Windows XP Check the Universal Plug and Play box and then click OK Click Add/Remove Windows ComponentsClick Finish Page Package Contents Technical SpecificationsSystem Requirements Dimensions L x W x HInternet Support Contacting Technical SupportWarranty Page Page Registration

DCS-5635, DCS-5605 specifications

The D-Link DCS-5605 and DCS-5635 are advanced surveillance cameras designed to provide reliable security solutions for both home and business environments. These models are part of D-Link's extensive line of IP cameras and are characterized by their impressive features and cutting-edge technologies.

One of the standout features of the DCS-5605 is its 5-megapixel resolution, which delivers high-quality video footage with exceptional clarity. This resolution ensures that users can capture even the finest details, making it easier to identify individuals or objects in the captured footage. Similarly, the DCS-5635 boasts a 5-megapixel sensor, providing users with sharp images and video recordings.

Both models come equipped with advanced infrared night vision capabilities, enabling them to capture clear images in low-light conditions. With an effective range of up to 30 meters, these cameras ensure that security is maintained even after the sun goes down. This feature is particularly beneficial for monitoring entrances or driveways at night.

In terms of connectivity, the DCS-5605 and DCS-5635 support Power over Ethernet (PoE), allowing for easy installation by transmitting both power and data through a single Ethernet cable. This eliminates the need for additional power sources and simplifies the setup process.

The cameras also feature built-in motion detection capabilities, which alert users when any movement is detected in the monitored area. This not only enhances security but also saves storage space by only recording when necessary. Additionally, users can set up custom motion detection zones to focus on specific areas of interest, further refining the surveillance process.

Users can access the live feeds from these cameras remotely via a web interface or mobile app, making monitoring convenient and efficient. The D-Link DCS-5605 and DCS-5635 are compatible with various security systems and can easily integrate into existing setups.

With robust construction and weather-resistant designs, both models are suitable for outdoor use. This makes them ideal for protecting property or assets in various environmental conditions.

In summary, the D-Link DCS-5605 and DCS-5635 offer unparalleled surveillance capabilities with their high-resolution imaging, night vision, PoE support, and versatile connectivity options. These cameras are perfect for those seeking reliable security solutions that can be tailored to individual monitoring needs.
Top Page Image Contents