Chapter 1 Overview
IP Camera Physical Details
5 | Recessed Reset button | Recessed button that reboots the IP camera or resets it to a |
|
| default state. You can use a pin or paper clip to depress it. It can |
|
| be used any time that the IP camera is on and can have various |
|
| effects, as described in the “Resetting the IP Camera” section |
|
| on page |
|
|
|
6 | Microphone and Video Output | Microphone |
| switches | • Internal |
|
| |
|
| on the IP camera. Support for the internal microphone will |
|
| be in future releases. |
|
| • External |
|
| connector. |
|
| Video Output |
|
| • NTSC 60Hz |
|
| National Television System Committee (NTSC) standard. |
|
| • PAL 50Hz |
|
| Phase Alternating Line (PAL) standard. |
|
|
|
7 | SD/SDHC card slot | Support for the SD/SDHC card slot will be available in future |
|
| releases. |
|
|
|
8 | Audio/Video out (green) | Allows the connection of an optional Y cable or mini cable with |
|
| BNC connector. You can connect a video monitor to the mini |
|
| cable with BNC connector. Both cables are included in the |
|
| optional audio/video cables accessory kit can be purchased |
|
| from Cisco (Cisco part number |
|
| Note Support for audio will be in future releases. |
|
|
|
9 | Microphone In (pink) | Connection for an external microphone. |
|
|
|
10 | Ethernet 10/100 RJ45 socket | Accepts a standard LAN cable to connect the IP camera to a |
|
| 10/100BaseT router or switch. |
|
|
|
11 | General Purpose I/O Terminal | General purpose input/output (GPIO) terminal block that is |
| Block | used to connect external input and output devices. For more |
|
| information, see Figure |
|
|
|
Cisco Video Surveillance 6030 IP Camera Installation Guide
|
| |
|