Powering the IP Camera On or Off

Chapter 4 Camera Management

Step 7 (Optional) Click Auto Focus to have the IP camera automatically adjust its focus. To automatically adjust the focus to a particular region in the field of view, check the Specify Region check box and draw or select a region before clicking Auto Focus.

The IP camera does not include an on/off switch. You power it on or off by connecting it to or disconnecting it from a power source. When you power off the IP camera, configuration settings are retained.

To power on the IP camera, take either of these actions:

•Use an STP (shielded twisted pair) Category 5 or higher network cable to connect the IP camera to a network switch that provides 802.3af compliant PoE.

•Use an optional 12 VDC or 24VAC power adapter to connect the IP camera to a wall outlet

To power off the IP camera, take either of these actions:

•If the IP camera is receiving PoE, disconnect the network cable

•If the IP camera is receiving power through the power adapter, unplug the adapter from the wall or disconnect it from the camera

Resetting the IP Camera

You reset the IP camera by pressing the Reset button on the IP Camera (see Figure 1-1 on page 1-3). There are various reset types, as described in Table 4-3.

You also can also perform these reset operations from the Maintenance Settings window as described in the Cisco Video Surveillance 6000 Series IP Camera Configuration Guide.

Table 4-3	Resetting the IP Camera

Reset Type		Procedure	Remarks

Reboot.		Press and immediately release	This action is equivalent to
		the Reset button.	powering the IP camera down
			and then powering it up. Settings
			that are configured for the IP
			camera are retained.

Factory reset.		Press and hold the button for at	Sets all IP camera options to
		least 15 seconds.	their default values. After you
			perform this procedure, follow
			the steps in the “Performing the
			Initial Setup of the IP Camera”
			section on page 3-1.

Cisco Video Surveillance 6030 IP Camera Installation Guide

4-4	OL-28492-02