Chapter 4 Camera Management
Adjusting the IP Camera Focus and Zoom
Table | Home Window Information (continued) | |
|
|
|
Field |
| Description |
|
| |
Gateway Address | IP address of the gateway through which the IP camera is connected. | |
|
|
|
Primary DNS |
| IP address of the primary DNS server, if configured for the IP camera. |
|
| |
Secondary DNS | IP address of the secondary DNS server, if configured for the IP camera. | |
|
|
|
IO Port Status |
|
|
|
|
|
Input Port 1 |
| Current state of input port 1 on the IP camera. |
|
|
|
Output Port 1 |
| Current state of output port 1 on the IP camera. |
|
| |
Stream 1 and Stream 2 |
| |
|
|
|
User |
| IP camera user name of each user who is accessing the primary video stream |
|
| (Stream 1) or the secondary video stream (Stream 2) through a client PC or |
|
| a |
|
| Be default, users appear in order of start time. To displays users in ascending |
|
| order of any information in any corresponding column, click the column |
|
| heading. Click a column heading again to reverse the display order. |
|
|
|
IP Address |
| IP address of the client device. |
|
|
|
Start Time |
| Time and date that the client accessed the video stream for this session. |
|
|
|
Elapsed Time |
| Length of time that the client has been accessing the video stream. |
|
|
|
Codec |
| Video codec being used for the stream. |
|
|
|
Adjusting the IP Camera Focus and Zoom
To adjust the IP camera focus and zoom, perform the following steps while viewing video from the camera. For information about viewing video, see “Viewing Live Video” section on page
Procedure
Step 1 Login to the IP camera.
The Home window appears.
Step 2 Click the View Video link.
The Camera Video & Control window appears.
Step 3 Verify that the field of view is correctly set.
Step 4 Click the Focus/Zoom toggle button located below the video pane.
Step 5 The focus and zoom controls appear.
Step 6 While watching the video pane, perform the following steps:
a.Move the Zoom slider until you achieve the desired zoom level.
b.Move the Focus slider until the video image is at its sharpest.
Cisco Video Surveillance 6030 IP Camera Installation Guide
|
| ||
|
|