Chapter 2 Camera Installation
IP Camera Installation
Step 11 While viewing video from the IP camera, perform the following steps to adjust the
a.Grip the two tilt adjustment screws and pan the IP camera left or right.
b.Loosen the two thumb screws, tilt the IP camera, then tighten the thumb screws.
c.Rotate the IP camera to adjust the image horizontal orientation.
Step 12 Install the black cover. Make sure to adjust the it inside the dome and trim ring assembly so that it does not block the lens from capturing video.
Step 13 Attach the security strap from the dome and trim ring assembly to the camera housing using the included screw.
Step 14 Attach the dome and trim ring assembly by positioning its pegs in the slots of the camera housing and twisting clockwise.
Cisco Video Surveillance 6020 IP Camera Installation Guide
|
| ||
|
|