Cisco Systems OL-28645-01 manual Camera Installation

Chapter 2 Camera Installation

Warnings Before Installation

• Do not disassemble the IP Camera. • Do not drop the IP Camera.

•Do not insert sharp or tiny objects into the IP Camera.

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

Warning The power supply must be placed indoors. Statement 331

Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA enclosure.

Warning This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353

Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable.

Note The power adapter that you use with the IP camera must provide power that is within +/–10% of the required power.

Note The equipment is to be connected to a Listed class 2, limited power source.

Cisco Video Surveillance 3520 IP Camera Installation Guide

OL-28645-01 2-3