AVerMedia Technologies MP2016, MP5000, MP3000 user manual 112

AVerMedia User’s Manual

EYES Pro/MP2016/MP3000/MP5000

6.2.3 Camera Setup

The setting is placed according to the privilege of every server for the cameras corresponding to the 16 channels respectively.

Follow the tasks below to finish this section:

1.Click Camera Setup. It will show a window like the following:

2.Change channel’s names by directly click on .

3.Arrow down the list to select the Server’s and Camera’s names for each channel.

4.Check Display to show the images on the screen and Recording to enable the recording function for each channel.

5.Click OK to save or Cancel to delete the previous arrangement.

The listed servers and cameras in the pull-down menu are decided by the settings of the each of the servers.

6.2.4 Schedule Recording

The function allows you to plan the recording schedule by date or weekday for all the channels.

AVerMedia User’s Manual

EYES Pro/MP2016/MP3000/MP5000

Do the steps following:

1.Click Schedule Recording to get the window besides:

2.Check the recording by date or by weekday and choose the

time by clicking the arrow of

the box . The following window will show as:

3.Click on the yy/mm position directly and use the upper left and upper right arrows and the red circle in the bottom left corner window to specify a date to be an operating time.

4.Click to confirm the time setting. A settled time will appear on the right blank box. Click Delete to delete the previous time setting.

5.Set the Start and End time by the up and down arrows in Time field.

111 112