Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Plug-and-Play installation
The auto sensing interfaces of the security gateway enables installation into any Ethernet network. By default, the security gateway functions as a DHCP client on the public interface and as a DHCP server on the private interface. Immediately after receiving IP connectivity, the network administrator can locate the security gateway via https://192.168.1.1 on the private interface. The administrator enters the name as root and the password as password for the user’s credentials. The quick set up guides the network administrator through the minimal network configuration.
Hardware components
Each of the major components are shown in Figure 2 and Figure 3.
Figure 2 Front panel
Ethernet activity indicator | Console RS 232 port |
Expansion slot | Private port | Public port | Multi interface ports |
| |||
| Ethernet0 | Ethernet1 | Ethernet2 & 3 |
Figure 3 Back panel
Power and On/Off switch | Expansion slot |
March 2004 | Introduction 13 |