Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Figure 8 Quick Setup Dialog
6.The Quick Setup wizard dialog appears. In the IP Configuration area, select one of the following IP Config Modes.
•Static Addressing. If you are going to use static addressing on the public port, click the Static Addressing radio button and enter your IP address, network mask, and default route information.
•DHCP. If you plan to use DHCP, the public port automatically obtains its address from a DHCP server. This method is typical for cable modem connections.
•PPPoE. This method is typically used with DSL connections. Click the PPPoE radio button and enter your PPPoE user name and password.
7.Depending on the IP config mode selected, complete the fields that populate the dialog.
•For Static, enter the IP address, mask and route
•For PPPoE, enter the user name and password
26 Setting up the security gateway for configuration | March 2004 |