Avaya SG203/SG208 Security Gateway Hardware Installation Guide
To connect to the security gateway
1.From a workstation on the private side of the security gateway, open your browser and type into the location field one of the following:
•https://sg.private
•https://192.168.1.1 (security gateway default address)
2.Click Yes, to accept the security alert message. The security gateway login window appears.
Figure 7 Security Gateway Login Window
3.Enter the User Name, root and the Password, password. Click Log In, when it is highlighted.
4.The first time you connect to the security gateway, two sequential pop- up messages appear over the main screen. The first is a password change alert that advises you to change the factory default password. Change the default password to a secure password.
5.The next alert message indicates that the security gateway has not yet been configured.
Click OK, to launch the Quick Setup wizard.
March 2004 | Setting up the security gateway for configuration 25 |