ACR Electronics 1930.3 manual Wiring to Searchlight, Wiring to Point Pad, Wiring to Power Supply

Page 11

Master

Searchlight

Power Source

Function

Controller Wire

Cable Wire

Lead

 

Orange

 

+12 VDC or +24

Power

 

 

VDC**

 

Blue

 

Ground

Ground

Yellow

Yellow

 

Lamp Power

Green

Green

 

Lamp Ground

Red

Red

 

Up

White

White

 

Down

Black

Black

 

Right

Brown

Brown

 

Left

Table 1

WARNING: This wire MUST be fused with a 15 amp fuse in the Master Controller's in-line fuse-holder.

Wiring to Searchlight

The RCL-100 Searchlight is supplied with a 15 foot integral wire harness. This wire harness is cut to this length specifically to allow for a voltage drop. Shortening the harness will decrease the life of the bulbs. Any extra length of wire harness should be loosely coiled in a convenient place. For best performance, the controller should be attached to the end of the 15' Searchlight wire harness. If you must lengthen the wire harness, use heavy duty wire to minimize the voltage drop. This is especially important for the YELLOW lamp power and GREEN lamp ground wires.

Following the wiring scheme shown in Table 1 use the supplied butt connectors to connect the Master Controller to the Searchlight.

Wiring to Point Pad™

The RG-59 Coax cable is supplied without the “F” connectors attached for ease of routing. After the coax has been routed, strip the insulation and crimp the “F” connectors in place. Screw the “F” connectors to the Master Controller and the Point Pad™.

Wiring to Power Supply

The power source must be a fused 12 VDC, 10-amp supply or 24 VDC, 5-amp supply. Following the wiring scheme in Table 1, use the supplied butt connectors to connect the Master Controller to the Power Source. Refer to Table 2 for proper wire size for connection of the input power lines.

Y1-03-0138V

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents RCL-100D Remote Control Searchlight System URC-102 Master Controller Table of ContentsForeword Remote Control Searchlight SystemMounting GeneralSearchlight Case Options Remote Control SystemConnecting to the Master Controller URP-102 Point PADY1-03-0138V Point Pad Connection Block Diagram URP-102 Point Pad Functions URP-102 Point Pad FunctionsURP-102 Point Pad Surface Mount Case URC-102 Master Controller General Wiring SchemeWiring to Power Supply Wiring to SearchlightWiring to Point Pad Maximum Cable Length Y1-03-0138V Spotlight URC-102 Master Controller Appendix a RCL-100D Specifications with URC-102 Controller ACR/RCL-100D Appendix B User Replaceable PartsAppendix C Bulb Replacement Procedure Appendix D Product Components Product No .3 URP-102 Point Pad Installation Kit includes Appendix E Accessory ComponentsProduct No .3 Remote Control Installation Kit Includes Limited Warranty Appendix F WARRANTY, NoticesEC Declaration of Conformity

1930.3 specifications

ACR Electronics 1930.3 is a state-of-the-art emergency locating device designed for a wide range of applications, including maritime, aeronautical, and outdoor adventure sports. This beacon is specifically engineered to provide robust and reliable emergency signaling capabilities, ensuring that users can always be located in times of crisis.

One of the standout features of the ACR Electronics 1930.3 is its advanced GPS technology. The device is equipped with a built-in GPS receiver, which enhances its accuracy in pinpointing the user's location. This feature is crucial during emergencies, as it aids rescuers in finding the beacon's signal with exceptional precision. The integration of GPS allows for faster response times and increases the likelihood of successful rescue missions.

Another key characteristic of the ACR 1930.3 is its ease of use. Designed with user-friendliness in mind, this beacon can be activated with a simple push of a button. The straightforward operation ensures that individuals under stress can quickly signal for help without fumbling with complicated procedures. Additionally, the device is compact and lightweight, making it easy to carry in various environments, from boats to backpacks.

The ACR 1930.3 also boasts impressive battery life, which is critical for emergency devices. It features a powerful battery that can operate for extended periods, ensuring that it remains functional for days or even weeks when fully charged. This longevity is essential, as it increases the chances of receiving assistance during prolonged emergencies.

In terms of durability, the ACR Electronics 1930.3 is built to withstand harsh environmental conditions. It is water-resistant and designed to operate effectively in extreme temperatures, making it suitable for use in challenging climates. The rugged construction ensures that users can rely on the beacon regardless of the situation.

Moreover, the device complies with international safety standards, including COSPAS-SARSAT requirements. This compliance guarantees that the beacon will transmit distress signals to satellite systems that monitor emergency situations globally.

In summary, ACR Electronics 1930.3 stands out as a reliable and effective emergency locating device. With advanced GPS technology, user-friendly design, long battery life, and robust durability, it serves as a critical tool for anyone venturing into remote or hazardous environments. Whether on land or at sea, the ACR 1930.3 provides peace of mind, knowing that help is just a button press away.
Top Page Image Contents