ACR Electronics 1930.3 manual Y1-03-0138V

Page 13

To deactivate the XRCiZ™ feature, press and hold the Point Pad™ ON/OFF button for greater than 5 seconds. The Red LED on the URC-102 Point Pad™ indicates that the XRCiZ™ feature is disabled.

NOTE: LED feedback is not available when using RCL-100 or URC- 101 Point Pads™.

NOTE: The Searchlight should not be covered while the XRCiZ™ feature is enabled.

The URC-102 Master Controller provides optimum voltage to ensure the brightest searchlight performance and long bulb life. Also to extend lamp life, the Master Controller has a timed lamp power up feature. The searchlight lamps reach full intensity within 2 seconds.

The URC-102 Master Controller has a searchlight motor timeout feature. If a Point Pad™ rotation switch (right or left) is continuously engaged for more than 50 seconds, the Master Controller will interrupt the operation until the Point Pad™ switch is disengaged. This feature will save the searchlight motor from burnout due to accidental activation. The elevation motor has similar features which will timeout in approximately 20 seconds.

Y1-03-0138V

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RCL-100D Remote Control Searchlight System URC-102 Master Controller Table of ContentsForeword Remote Control Searchlight SystemSearchlight GeneralMounting Connecting to the Master Controller Remote Control SystemURP-102 Point PAD Case OptionsY1-03-0138V Point Pad Connection Block Diagram URP-102 Point Pad Functions URP-102 Point Pad FunctionsURP-102 Point Pad Surface Mount Case URC-102 Master Controller General Wiring SchemeWiring to Point Pad Wiring to SearchlightWiring to Power Supply Maximum Cable Length Y1-03-0138V Spotlight URC-102 Master Controller Appendix a RCL-100D Specifications with URC-102 Controller ACR/RCL-100D Appendix B User Replaceable PartsAppendix C Bulb Replacement Procedure Appendix D Product Components Product No .3 URP-102 Point Pad Installation Kit includes Appendix E Accessory ComponentsProduct No .3 Remote Control Installation Kit Includes Limited Warranty Appendix F WARRANTY, NoticesEC Declaration of Conformity

1930.3 specifications

ACR Electronics 1930.3 is a state-of-the-art emergency locating device designed for a wide range of applications, including maritime, aeronautical, and outdoor adventure sports. This beacon is specifically engineered to provide robust and reliable emergency signaling capabilities, ensuring that users can always be located in times of crisis.

One of the standout features of the ACR Electronics 1930.3 is its advanced GPS technology. The device is equipped with a built-in GPS receiver, which enhances its accuracy in pinpointing the user's location. This feature is crucial during emergencies, as it aids rescuers in finding the beacon's signal with exceptional precision. The integration of GPS allows for faster response times and increases the likelihood of successful rescue missions.

Another key characteristic of the ACR 1930.3 is its ease of use. Designed with user-friendliness in mind, this beacon can be activated with a simple push of a button. The straightforward operation ensures that individuals under stress can quickly signal for help without fumbling with complicated procedures. Additionally, the device is compact and lightweight, making it easy to carry in various environments, from boats to backpacks.

The ACR 1930.3 also boasts impressive battery life, which is critical for emergency devices. It features a powerful battery that can operate for extended periods, ensuring that it remains functional for days or even weeks when fully charged. This longevity is essential, as it increases the chances of receiving assistance during prolonged emergencies.

In terms of durability, the ACR Electronics 1930.3 is built to withstand harsh environmental conditions. It is water-resistant and designed to operate effectively in extreme temperatures, making it suitable for use in challenging climates. The rugged construction ensures that users can rely on the beacon regardless of the situation.

Moreover, the device complies with international safety standards, including COSPAS-SARSAT requirements. This compliance guarantees that the beacon will transmit distress signals to satellite systems that monitor emergency situations globally.

In summary, ACR Electronics 1930.3 stands out as a reliable and effective emergency locating device. With advanced GPS technology, user-friendly design, long battery life, and robust durability, it serves as a critical tool for anyone venturing into remote or hazardous environments. Whether on land or at sea, the ACR 1930.3 provides peace of mind, knowing that help is just a button press away.
Top Page Image Contents