ACR Electronics 1930.3 manual Appendix C Bulb Replacement Procedure

Page 18

APPENDIX C - BULB REPLACEMENT PROCEDURE

Two 55W, quartz-halogen bulbs are provided with your RCL-100D. If they should need replacement, they can be ordered through an ACR dealer or through ACR Electronics. The part numbers are P/N 6001 for 12V units and P/N 6003 for 24V units.

CAUTION: Failure to follow replacement instructions carefully can result in damage to bulb and/or light. All part sales are final.

To replace the lamps:

1.Disconnect unit from power source and allow bulbs to cool.

2.Remove two screws holding the front flange and glass in place.

3.To remove the old lamp bulbs, grasp base of the lamp and pull straight out.

WARNING: Do not touch glass parabolic reflector with fingers or tools!

4.Install the new lamp bulb using a soft clean cloth to avoid touching the bulb with your fingers. Insert the lamp bulb pins into socket and press firmly in place.

CAUTION: If the lamp bulbs or reflectors are accidentally touched, carefully clean with a soft rag and alcohol (isopropanol) before continuing.

5.Replace the front flange and glass and install the two retaining screws. Be sure the neoprene gasket is securely in place.

6.Reconnect the unit to the power source.

Y1-03-0138V

18

Image 18
Contents RCL-100D Remote Control Searchlight System Table of Contents URC-102 Master ControllerRemote Control Searchlight System ForewordGeneral SearchlightMounting URP-102 Point PAD Remote Control SystemConnecting to the Master Controller Case OptionsY1-03-0138V Point Pad Connection Block Diagram URP-102 Point Pad Functions URP-102 Point Pad FunctionsURP-102 Point Pad Surface Mount Case General Wiring Scheme URC-102 Master ControllerWiring to Searchlight Wiring to Point PadWiring to Power Supply Maximum Cable Length Y1-03-0138V Spotlight URC-102 Master Controller Appendix a RCL-100D Specifications with URC-102 Controller Appendix B User Replaceable Parts ACR/RCL-100DAppendix C Bulb Replacement Procedure Appendix D Product Components Appendix E Accessory Components Product No .3 URP-102 Point Pad Installation Kit includesProduct No .3 Remote Control Installation Kit Includes Appendix F WARRANTY, Notices Limited WarrantyEC Declaration of Conformity

1930.3 specifications

ACR Electronics 1930.3 is a state-of-the-art emergency locating device designed for a wide range of applications, including maritime, aeronautical, and outdoor adventure sports. This beacon is specifically engineered to provide robust and reliable emergency signaling capabilities, ensuring that users can always be located in times of crisis.

One of the standout features of the ACR Electronics 1930.3 is its advanced GPS technology. The device is equipped with a built-in GPS receiver, which enhances its accuracy in pinpointing the user's location. This feature is crucial during emergencies, as it aids rescuers in finding the beacon's signal with exceptional precision. The integration of GPS allows for faster response times and increases the likelihood of successful rescue missions.

Another key characteristic of the ACR 1930.3 is its ease of use. Designed with user-friendliness in mind, this beacon can be activated with a simple push of a button. The straightforward operation ensures that individuals under stress can quickly signal for help without fumbling with complicated procedures. Additionally, the device is compact and lightweight, making it easy to carry in various environments, from boats to backpacks.

The ACR 1930.3 also boasts impressive battery life, which is critical for emergency devices. It features a powerful battery that can operate for extended periods, ensuring that it remains functional for days or even weeks when fully charged. This longevity is essential, as it increases the chances of receiving assistance during prolonged emergencies.

In terms of durability, the ACR Electronics 1930.3 is built to withstand harsh environmental conditions. It is water-resistant and designed to operate effectively in extreme temperatures, making it suitable for use in challenging climates. The rugged construction ensures that users can rely on the beacon regardless of the situation.

Moreover, the device complies with international safety standards, including COSPAS-SARSAT requirements. This compliance guarantees that the beacon will transmit distress signals to satellite systems that monitor emergency situations globally.

In summary, ACR Electronics 1930.3 stands out as a reliable and effective emergency locating device. With advanced GPS technology, user-friendly design, long battery life, and robust durability, it serves as a critical tool for anyone venturing into remote or hazardous environments. Whether on land or at sea, the ACR 1930.3 provides peace of mind, knowing that help is just a button press away.