IPUX CS101A manual Network Network, „ IP Setting

Page 24

Network >> Network

„IP Setting

This item allows you to select the IP address mode and set up the related configuration.

-DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP server automatically.

-Static IP: Select this option to assign the IP address for the camera directly. You can use IP Finder to obtain the related setting values.

IP

Enter the IP address of the camera. The

 

default setting is 192.168.0.30.

 

 

Subnet Mask

Enter the Subnet Mask of the camera. The

 

default setting is 255.255.255.0.

Default Gateway

Enter the Default Gateway of the camera.

 

The default setting is 192.168.0.1.

Primary/

DNS (Domain Name System) translates

Secondary DNS

domain names into IP addresses. Enter the

 

Primary DNS and Secondary DNS that are

 

provided by ISP.

-PPPoE: Select this option when you use a direct connection via the ADSL modem. You should have a PPPoE account from your Internet service provider. Enter the User Name and Password. The camera will get an IP address from the ISP as starting up.

NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.

- 23 -

Image 24
Contents Wireless Mjpeg Network Camera Preface Contents Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Front ViewRear View Features and Benefits „ Remote Control Supported„ Surveillance Supported „ Multiple Platforms Supported„ Accessing the Camera using Web Browser „ Accessing the Camera using Ultra ViewSystem Requirement „ NetworkingInstalling the Camera Stand Camera StandConnecting the Camera to LAN/WLAN Applications of the Camera Home ApplicationsChapter Accessing the Camera Using IP FinderAccessing to the Camera Page Page Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationUsing Smart Wizard Camera SettingsIP Settings Email Settings Wireless NetworkingConfirm Settings Basic Setup Basic SystemBasic Date & Time „ Administrator Basic User„ General User „ GuestNetwork Settings „ IP Setting Network NetworkDdns Setting „ UPnP„ Ports Number Network Wireless Setting „ WirelessNetwork IP Filter „ Start/End IP AddressCamera Infrastructure or Ad-Hoc OpenShared-key WPA-PSKPage Setting up Video „ Image Setting „ Overlay SettingVideo Camera Video VideoEvent Server Configuration Event Server Setting FTP Event Server Setting Email„ Email Motion Detect Event Config Event Configuration General SettingEvent Configuration Arrange Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule TriggerSent to Send Email, or FTP Upload Tools „ Factory Reset „ System Reboot„ Configuration „ Update FirmwareInformation „ Device Info„ System Log Specification Power „ Communication„ System Hardware Processor ARM9 base 4MB NOR FlashReset „ User InterfaceAntenna LEDsGlossary of Terms Dhcp DNSEnterprise NetworkEthernet Fast EthernetHEX IntranetInternet Internet addressISP JavaLAN MjpegNWay Protocol PCMPing PPPoEProtocol RJ-45Router RTPSIP SmtpSnmp TCP/IPUDP UTPWAN WEP