IPUX CS101A manual Ddns Setting, UPnP, Ports Number

Page 25

DDNS Setting

With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet IP address. Select the Enable option to enable this feature. Then, select the Provider from the pull-down list and enter the required information in the Host Name, User Name, and Password boxes. Please note that you have to sign up for DDNS service with the service provider first.

UPnP

The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the device-to- device interoperability. In addition, it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall. Select the Enable option to enable this feature.

Ports Number

- HTTP Port: The default HTTP port is 80.

NOTE If the camera is behind an NAT router of firewall, the suggested to be used is from 1024 to 65535.

- 24 -

Image 25

Contents Wireless Mjpeg Network Camera Preface Contents Chapter Introduction to Your Camera Checking the Package ContentsFront View Getting to Know Your CameraRear View „ Remote Control Supported Features and Benefits„ Surveillance Supported „ Multiple Platforms Supported„ Accessing the Camera using Ultra View „ Accessing the Camera using Web BrowserSystem Requirement „ NetworkingCamera Stand Installing the Camera StandConnecting the Camera to LAN/WLAN Home Applications Applications of the CameraUsing IP Finder Chapter Accessing the CameraAccessing to the Camera Page Page Configuring the IP Address of the PC Using the Web Configuration Chapter Configuring the CameraCamera Settings Using Smart WizardIP Settings Wireless Networking Email SettingsConfirm Settings Basic System Basic SetupBasic Date & Time Basic User „ Administrator„ General User „ GuestNetwork Settings Network Network „ IP Setting„ UPnP Ddns Setting„ Ports Number „ Wireless Network Wireless SettingNetwork IP Filter „ Start/End IP AddressOpen Camera Infrastructure or Ad-HocShared-key WPA-PSKPage Setting up Video „ Overlay Setting „ Image SettingVideo Camera Video VideoEvent Server Configuration Event Server Setting Email Event Server Setting FTP„ Email Motion Detect Event Configuration General Setting Event ConfigEvent Configuration Arrange Schedule Profile Event Configuration Schedule Trigger Event Configuration Motion Detect TriggerSent to Send Email, or FTP Upload Tools „ System Reboot „ Factory Reset„ Configuration „ Update Firmware„ Device Info Information„ System Log Power „ Communication Specification„ System Hardware Processor ARM9 base 4MB NOR Flash„ User Interface ResetAntenna LEDsGlossary of Terms DNS DhcpNetwork EnterpriseEthernet Fast EthernetIntranet HEXInternet Internet addressJava ISPLAN MjpegPCM NWay ProtocolPing PPPoERJ-45 ProtocolRouter RTPSmtp SIPSnmp TCP/IPUTP UDPWAN WEP