IPUX CS101A Network IP Filter, Network Wireless Setting, Start/End IP Address, Deny IP List

Page 26

Network >> IP Filter

The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera.

Start/End IP Address

Assign a range of IP addresses that are not allowed to access the camera by entering the Start IP address and End IP address. When you are finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.

For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address, the user whose IP address located within 192.168.0.50 ~ 192.168.0.80 will not be allowed to access the camera.

Deny IP List

The list displays the range setting(s) of IP addresses that are not allowed to access the camera. To clear the setting, select a range of IP addresses from the list and click Delete.

Network >> Wireless Setting

Wireless

The camera supports WLAN while you use the wireless network. Select the Enable option to enable this feature.

-Network ID (SSID}: Keep the default setting of this option to connect the camera to any access point under the infrastructure network mode. To connect the camera to a specified access point, set a SSID for the camera to correspond with the access point’s ESS-ID. To connect the camera to an

Ad-Hoc wireless workgroup, set the same wireless channel and SSID to match with the computer’s configuration.

-25 -

Image 26

Contents Wireless Mjpeg Network Camera Preface Contents Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Front ViewRear View „ Surveillance Supported Features and Benefits„ Remote Control Supported „ Multiple Platforms SupportedSystem Requirement „ Accessing the Camera using Web Browser„ Accessing the Camera using Ultra View „ NetworkingInstalling the Camera Stand Camera StandConnecting the Camera to LAN/WLAN Applications of the Camera Home ApplicationsChapter Accessing the Camera Using IP FinderAccessing to the Camera Page Page Configuring the IP Address of the PC Chapter Configuring the Camera Using the Web ConfigurationIP Settings Using Smart WizardCamera Settings Email Settings Wireless NetworkingConfirm Settings Basic Date & Time Basic SetupBasic System „ General User „ AdministratorBasic User „ GuestNetwork Settings „ IP Setting Network Network„ Ports Number Ddns Setting„ UPnP Network IP Filter Network Wireless Setting„ Wireless „ Start/End IP AddressShared-key Camera Infrastructure or Ad-HocOpen WPA-PSKPage Setting up Video Video Camera „ Image Setting„ Overlay Setting Video VideoEvent Server Configuration „ Email Event Server Setting FTPEvent Server Setting Email Motion Detect Event Config Event Configuration General SettingEvent Configuration Arrange Schedule Profile Sent to Send Email, or FTP Upload Event Configuration Motion Detect TriggerEvent Configuration Schedule Trigger Tools „ Configuration „ Factory Reset„ System Reboot „ Update Firmware„ System Log Information„ Device Info „ System Hardware Processor ARM9 base SpecificationPower „ Communication 4MB NOR FlashAntenna Reset„ User Interface LEDsGlossary of Terms Dhcp DNSEthernet EnterpriseNetwork Fast EthernetInternet HEXIntranet Internet addressLAN ISPJava MjpegPing NWay ProtocolPCM PPPoERouter ProtocolRJ-45 RTPSnmp SIPSmtp TCP/IPWAN UDPUTP WEP