FIGURE 2: DIAGRAM OF GXW410X DISPLAY PANEL
GXW410x
Display
FXO port
TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL
Power LED Indicates Power. Remains ON when Power is connected and unit is turned ON.
Ready LED |
| Remains ON after |
|
|
|
LAN LED |
| Indicates WAN port activity in the back side |
|
|
|
PC LED |
| Indicates LAN port activity in the back side |
|
|
|
Video LED |
| Remains solid green on |
|
| video activity. |
|
| Available in HW revision 1 Only |
|
|
|
LEDs 1 - 8 |
| Indicate status of the respective FXO Ports on the back panel |
|
| Busy - ON |
|
| Available – OFF |
NOTE: All LEDs display green when ON. The Ready light will only be ON when the network interface is ready and the Web User Interface is accessible.
During a firmware upgrade or configuration download the following LED pattern will be observed:
Power, Ready, Video and WAN LEDs will be ON. The FXO port LED will keep flashing during download and then stay OFF while the new files are written. The entire process may take between 20 to 30 minutes. The firmware upgrade is complete when you can login into the web configuration pages.
Grandstream Networks, Inc. | GXW410x User Manual | Page 6 of 35 |
Firmware Version 1.3.4.13 |
| Last Updated: 3/2012 |