GXV3651_FHD IP Camera
either an actual phone number or extension or is formatted like one.
Authenticate ID – The SIP service subscriber‘s Authenticate ID used for authentication. It can be identical to or different from the SIP User ID.
Authenticate Password – The SIP service subscriber‘s account password for the GXV to register to the SIP server of the ITSP.
STUN Server – If the device is behind a router, a STUN server is needed to help penetrate the NAT.
Stream – Choose between Primary and Secondary stream resolutions. Preferred Vocoder – Choose between different Vocoder (codec) type.
Registration Expiration – This parameter allows users to specify the time frequency (in minutes) in which the GXV refreshes its registration with the specified registrar. The default interval is 60 minutes.
Local SIP Port – This parameter defines the local SIP port used to listen and transmit. The default value is 5060.
Local RTP Port – This parameter defines the local
5.Click Save to save all the changes. You need to restart the device to apply all changes.
Configure the Phone List Page
To make sure the GXV3651_FHD can make phone calls to the number you preferred when the alarm is triggered, you need to add a number to the phone list.
Steps to add phone number:
1.From the GXV3651_FHD home page, click Basic Settings > SIP.
2.Go to Phone List Tab.
3.Enter the Phone number and name, click Add a Number to save all the changes.
4.Numbers added to the system will be listed in this page.
Available phone numbers
NOTE: With current firmware, only the first phone number in the list will be called when an
Firmware 1.0.1.32 | Page 21 of 36 |
Grandstream Networks, Inc. | 06/2011 |