GXV3651_FHD IP Camera
GXV3651_FHD Motion Detection Page
The GXV3651_FHD supports Motion Detection. To utilize this feature, please follow the steps below:
1.Setup the motion detection monitored area.
2.Configure the motion detection time schedule.
3.Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If this option is selected, the motion detection regions will be displayed on the screen with a white border.
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the white border will flash red when a motion detection alarm is triggered.
Firmware 1.0.1.32 | Page 30 of 36 |
Grandstream Networks, Inc. | 06/2011 |