Application Feature Setup
2.Example assumes hardwired start is in auto. If other, modify P0732 as appropriate.
For proper Interlock operation, set the following SED2 parameters:
•P0700 in000 = 2
Digital input that is the start command in the auto mode (from the damper end switch)
•P0700 in001 = 2
Digital input that is the start command in the hand mode (from the damper end switch)
•P0701 in000 = 99 and P0701 in001 = 99 Initiate BiCo
•P0702 in000 = 3 and P0702 in001 = 3
•P0732 in000 = 722.0
Tells the drive through BiCo that instead of starting the drive in auto mode when the Remote Start input closes, it should close the SED2 Relay.
NOTE: If P1 is the start command in auto, change the following parameters:
P0003 = 4 (before changing this setting, note the current setting)
P3950 = 46
P0732 in000 = 2090.0
P0003 = Change back to previous setting (1, 2, or 3)
•P0732 in001 = 19.0
Tells the drive through BiCo that instead of starting the drive in hand mode when the green Start button is selected, it should close the SED2 Relay.
•P0704 in000 = 1 and P0704 in001 = 1
NOTE: For a complete description of BiCo, see the SED2 VFD Startup, Operation, and Maintenance Manual
Siemens Building Technologies, Inc. | 45 |
