Gembird manual PC connection with CAM77IP using Camez Search Tool

Page 36

IP camera

PC connection with CAM77IP (using CAM_EZ Search Tool)

Step 1. CAM77IP, HUB and PC connection diagram:

Step 2. Execute CAM_EZ Search, Click the CAM77IP name listed from the box, the default IP address should be 192.168.1.100; Gateway: 192.168.1.1, click Submit to refresh. Step 3. For PC setting, Click "Start"=>"Settings"=>"Network Connections", right-click on "Local Connections", choose "Properties"(Please refer to Chapter 2.2)

Step 4. Choose Internet Protocol (TCP/IP), choose "Properties", choose "Specify and IP address on the IP address".

Step 5. Enter IP address as 192.168.1.2; subnet mask as 255.255.255.0; default gateway as 192.168.1.1 (Please set IP address range from 192.168.1.1 ~ 192.168.1.253), click to confirm.

Step 6. Execute EZ Search Tool again. Double click the CAM77IP name listed. Now you can setup the PPPoE from IE.

Image 36 Gembird manual PC connection with CAM77IP using Camez Search Tool
Contents CAM77IP LAN-controlled IP camera IP camera Introduction Features SpecificationPackage contents System requirementsHardware Descriptions and Connection CAM77IP Network Camera Bottom ViewBottom Front Connectors Installation and configurations PowerInsertion of SD memory storage card Camez Search IP camera System Login IP camera Real-time Surveillance Real-time Snapshot Advanced Function With Liveview Image Adjustment AVI Record SetupMotion Detection Setup Zoom in DisplayImage Setup Advanced ApplicationCapture View Event Trigger EventTrigger Network Setup IP AssignmentPPPoE Http ServerDNS Server Server Setup Mail ServerFTP Server Ddns ServerNTP Server Administration Setup Camera NameGeneral User Administrator Software Update SetupIP camera User using computer to apply for Ddns account IP camera IP camera PC connection with CAM77IP using Camez Search Tool Using Ddns to view CAM77IP network camera IP camera IP camera Configuring your cameras Configuring Port forwarding on the Router Viewing the Cameras from the Internet Config should only be made locally