Gembird CAM77IP manual NTP Server

Page 29

IP camera

Step 1. Register a set of account, password and HTTP user website from DDNS service (e.g. http://www.dyndns.org)

Step 2. Host Name: Fill in the DDNS host information (IP address or HTTP format) Applied IP website, account and password filled into Host Name, Account ID and Password respectively.

Step 3. Account ID: Account ID to login DDNS server.

Step 4. Password: Password to associate with Account ID.

Step 5. Status: DDNS connection status display automatically Step 6. Click Submit to confirm and save settings.

NTP Server

NTP (Network Time Protocol) as time server, provide IPCAM with time adjustment.

Step 1. Enter IP address or HTTP address for NTP server.

Step 2. In Time Zone, right-side pull down menu to choose Time Zone. Step 3. Click Submit to confirm and save settings.

Image 29
Contents CAM77IP LAN-controlled IP camera IP camera Introduction Specification FeaturesSystem requirements Package contentsCAM77IP Network Camera Bottom View Hardware Descriptions and ConnectionBottom Front Connectors Power Installation and configurationsInsertion of SD memory storage card Camez Search IP camera System Login IP camera Real-time Surveillance Real-time Snapshot Advanced Function With Liveview AVI Record Setup Image AdjustmentZoom in Display Motion Detection SetupAdvanced Application Image SetupCapture View Event Event TriggerTrigger IP Assignment Network SetupHttp Server PPPoEDNS Server Mail Server Server SetupDdns Server FTP ServerNTP Server General User Administration SetupCamera Name Software Update Setup AdministratorIP camera User using computer to apply for Ddns account IP camera IP camera PC connection with CAM77IP using Camez Search Tool Using Ddns to view CAM77IP network camera IP camera IP camera Configuring your cameras Configuring Port forwarding on the Router Viewing the Cameras from the Internet Config should only be made locally