Sun Microsystems 6900 Series, 3900 Series manual Table B-4Other SUNWsecfg Error Messages, Boxtype

TABLE B-4Other SUNWsecfg Error Messages

Message	Description and Cause of Error	Suggested Action
Common to all	If the Sun StorEdge 3900 or 6900 series	Set the BOXTYPE variable as follows:
components	has multiple (more than two) failures	BOXTYPE=6910; export BOXTYPE
	(for example, both virtualization
	engines and two switches are down),
	the getcabinet tool might not
	determine the correct cabinet type. In
	this example, the getcabinet script
	might determine the device to be a Sun
	StorEdge 3900 series when, in reality, it
	is a Sun StorEdge 6900 series.
	Could not determine the Sun StorEdge	Try using the command line interface
checkdefaultconfig	system type.	(CLI) by setting the BOXTYPE
		environment variable to one of the four
	Multiple components might be down	values.
	and the getcabinet command could not
	determine the Sun StorEdge series type	For example, BOXTYPE=3910; export
	(3910, 3960, 6910, or 6960).	BOXTYPE).
setdefaultconfig	The system could not determine the	Try using the command line interface
	Sun StorEdge system type.	(CLI) by setting the BOXTYPE
		environment variable to one of the four
		values.
		For example, BOXTYPE=3910; export
		BOXTYPE).

140 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002