Sun Microsystems 6900 Series, 3900 Series manual Luxadm probe

Category	Component	EventType	Sev	Action	Description	Information
t3	ib	Comm_Lost	Down	Y	[ Info/Action ] Lost	Recommended action:
					communication	1.	Verify luxadm via
					(InBandwithdiag213		command line
					(ip=xxx.20.67.21		(luxadm probe,
					3) ( last reboot was		luxadm display)
					2001-09-27 15:22:00)	2.	Verify cables,
							GBICs and
							connections along
					Information: InBand.		data path.
					This event is	3.	Check the Storage
					established using		Automated
					luxadm. This		Diagnostic
					monitoring may not		Environment SAN
					be activated for a		Topology GUI to
					particular Sun		identify the failing
					StorEdge T3+ array.		segment of the
							data path.
						4.	Verify the correct
							FC switch
							configuration, if
							applicable.
t3	oob	Comm_Lost	Down	Y	[ Info/Action ] Lost	Recommended action:
					communication	1.	Check Ethernet
					(OutOfBand with		connectivity to the
					diag213		affected Sun
					(ip=xxx.20.67.212)		StorEdge T3+
							array.
					Probable Cause: This	2.	Verify the Sun
					problem can also be		StorEdge T3+ array
					caused by a very slow		is booted correctly.
					network, or because	3.	Verify the correct
					the Ethernet		TCP/IP settings on
					connection to this Sun		the Sun StorEdge
					StorEdge T3+ array		T3+ array .
					was lost.	4.	Increase the http
							and/or ping
					Information:		timeout in
							Utilities--
					OutOfBand. This		>System--
					means that the Sun		>System--
					StorEdge T3+ array		>Timeouts. The
					failed to answer to a		current default
					ping or failed to		timeouts are 10
					return its tokens.		seconds for ping
							and 60 seconds for
							http (tokens).

114 Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002