Sun Microsystems 3900 Series, 6900 Series manual Has reported a disk

Category	Component	EventType	Sev	Action	Description	Information
t3	disk	Remove	Red	Y	[ Info/Action ]	Information: The Sun
		Component				StorEdge T3+ array
					disk.u2d3(SEAGAT	has reported a disk
					E.ST318203FSUN18	has been removed
					G.LRG07139) was	from the chassis.
					removed from
					diag158	Recommended action:
					(ip=xxx.20.67.158)
						Replace the disk
						within the 30-minute
						power shutdown
						window.
t3	interface.	Remove	Red	Y	[ Info/Action ]	Recommended action:
	loopcard	Component
					Information:	Replace the loopcard
						within the 30-minute
					The Sun StorEdge T3+	power shutdown
					array has reported	window
					that a loopcard has
					been removed from
					the chassis.
t3	power	Remove	Red	Y	[ Info/Action ]	Information: The Sun
		Component				StorEdge T3+ array
					’power.u1pcu2’(TE	has reported that a
					CTROL-CAN.300-	power cooling unit
					1454-	has been removed
					01(50).008275)	from the chassis.
					was removed from T3
					diag213	Recommended action:
					(ip=xxx.20.67.213)	Replace the PCU
						within 30-minute
						shutdown window.
t3	controller	State			’controller.u1ctr
		Change+			’ in T3 diag213
					(ip=xxx.20.67.213)
					is now Available
					(status-state changed
					from disabled to
					ready-enabled)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 117

For Internal Use Only