Sun Microsystems 3900 Series Stopping and Restarting the Slic Daemon, To Restart the Slic Daemon

Stopping and Restarting the SLIC Daemon

Follow this procedure to restart the SLIC daemon if the SLIC daemon becomes unresponsive, or if messages such as the following are displayed:

connect: Connection refused or Socket error encountered..

▼To Restart the SLIC Daemon

1.Check whether the SLICD is running:

#ps -eaf grep slicd

2.Check for any message queues, shared memory, or semaphores still in use:

#ipcs

IPC status from <running system> as of Wed Feb 20 12:48:30 MST 2002

T	ID	KEY	MODE	OWNER	GROUP
Message Queues:
Shared Memory:
m	0	0x50000483	--rw-r--r--	root	root
m	301	0x5555aa8a	--rw-------	root	other
m	302	0x5555aaaa	--rw-------	root	other
m	303	0x5555aaba	--rw-------	root	other
m	4	0x7cc	--rw-------	root	root
Semaphores:
s	196608	0x5555aa9a	--ra-------	root	other
s	196609	0x5555aa7a	--ra-------	root	other
s	196610	0x5555aaba	--ra-------	root	other
s	3	0x10e1	--ra-------	root	root

Segments identified with 0x5555aa in the address are associated with the SLIC daemon.

Chapter 7 Troubleshooting Virtualization Engine Devices 87

For Internal Use Only